![]() ![]() Parallel Recording in 'Text & Graphic Form' at 1mSec Sample Rate (0.5 sec/graph).All 6x ADC signals overlap together into a single line: x1, x2, x5, x10 (Zoom Scale).3.0V battery measurement with Vref Off/On Comparison.Disconnect the iCP12 and switch back the SW1 to ' B' for normal operation.Then program the iCP12 with provided firmware (iCP12_xx_Firmware.hex) file.First, switch the SW1 to ' A' for bootloader mode and connect it to USB port.iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port.Preloaded Firmware: HID Bootloader + iCP12 DAQv1.4 Firmware.Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.Īccessories List: (These accessories would be shipped together) Overvoltage or overcurrent may damage the MCU.Standard 4圆 2.54mm Pin Socket for IO Port connection.Standard 1x5 2.54mm Pin Socket for ICSP connection.End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop).Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run).Trigger Mode: Larger, Smaller, Positive edge, Negative edge. ![]() Sampling voltage: 0V - 5V (auto & scalable graph) at 1mV Res. Dispaly.Maximum Sampling rate: 1KHz or 1mSec/Samples.Sampling channel: 6x Analogs (10/12 bit ADC) + 7x Digitals (Input/Output).Switch Mode Selection - Boot or Normal modeĪpplications ( We welcome your feedback) :.ICSP Connector - on-board PIC programming.2x LEDs (Green, Red) - status indicator.100mA current output at VDD pin with over-current protection. ![]() Supported operating systems (32bit/64bit): Windows XP ,Windows Vista, Windows 7, Windows 8, Windows 10, Linux, Mac OS X and Raspberry Pi.Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps).13x IO Port (6x 10/12bit ADC pins, 2x 10 bit PWM/Freq/DAC pins).Excellent flexibility that allows user to expand the board with plug and play modules.Used with PIC18F2550 or PIC18F2553 28-Pin Flash USB PIC MCU.Mini size, easy interfacing, high performance and user friendly device.The features of iCP12 are listed as followings: ![]() * NEW iCP12 in Arduino Form (iCP12A - DAQduino): Link With these IO ports, user can easily plug in different type of IO modules with direct conntection to USB port. UsbStick is built with a simple set of external ports connection that fulfilled any type connector. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |